About UsLens By TypeLens By CategoryInstrumentsEquipmentsOptical Materials
Supply Division
Instruments

Equipments

Optical Materials

New

Promo


1st and 2nd Step Fining Pads  
6 Leaf Shape  
           
7 Leaf Shape  
 
   
           

2 Step Fining System

280 Grit Roughing pad

(Part no: P06090111) - 76mm 7 Leaf w/o Hole

 

An aggressive silicon carbide material specifically developed as a superior fine pad for polycarbonate lenses. It gives a consistent removal rate throughout the tinning operation and leaves a regular surface ready for the next fining stage. This pad can also be used as a standard roughing pad for CR39 and Hi-Index lenses with excellent results.

 

Material: Silicon Carbide

Thickness: 0.30mm

Sizes: 76mm

Suitability: Satisloh, Gerber Corburn, CMV, Essilor, Siko

Slurry: Plain water

Country of origin: USA

 

P06090111

Standard Packing: 500pcs/roll - 30rolls/ctn

Packing Dimension: 42 X 41 X 55

Packing Weight: 30.2Kgs

 ……………………………………………………………………………………………

 

1st Step Fining Pad

(Part no: P06090399)   - 76mm 6 Leaf w/o Hole

(Part no: P06090399A) - 76mm 7 Leaf w/o Hole

 

A newly developed product from 3M giving high stock removal rates for CR39 and Hi-Index materials.

 

Material: Silicon Carbide

Thickness: 0.23mm

Size: 76mm / 6 leaves

Suitability: Gerburn Coburn, Satisloh

Grit Size: 600

Slurry: Plain water

Country Origin: United State of America

 

P06090399

Standard Packing: 500pcs/roll - 30rolls/Ctn

Packing Dimension: 42 x 41 x 55cm

Packing Weight: 29.6Kgs

 

P06090399A

Standard Packing: 500pcs/roll - 30rolls/Ctn

Packing Dimension: 42 x 41 x 55cm

Packing Weight: 29Kgs 

...........................................................................................................................................................

 

2nd Step Fining Pad

(Part no: P06090239)   - 76mm 6 Leaf w/o Hole

(Part no: P06090239A) - 76mm 7 Leaf w/o Hole

 

A 3M quality pad special design for:

• plastic lenses (all refractive indices)

• polycarbonate

• high surface grains removers

Provides stock removal required to remove scratch pattern from first fine.

Provides exceptional surface finish first polishing.

3 Micron 3M light purple

 

Material: Aluminum oxide stock

Stock removal: 0.03 mm

Diameter: 3 inches/76mm round 6 / 7 Leaf

Thickness: 0.009 inches or 0.23mm

Slurry: plain water

Suitability: Satisloh, Gerber Coburn, Norville AutoFlow

Country Origin: United State of America

 

Standard Packing: 500pcs/roll - 48lls/Ctn

Packing Dimension: 42 X 41 X 55cm

Packing Weight: 37Kgs

...........................................................................................................................................................

 

2nd Step Fining 12 Micron Pad

(Part no: P06090385)   - 89mm 6 Leaf w/o Hole

(Part no: P06090113)   - 76mm 6 Leaf w/o Hole
(Part no: P06090113A) - 76mm 7 Leaf w/o Hole


A 3M quality pad with a radically different abrasive particle construction. A rigid selection process at the particle manufacturing stage ensures that only the finer particles are used in its construction thereby guaranteeing that while stock removal is consistent through the full range of lens curves, the surface is exceptional for all CR39 and Hi-Index materials.

Material: Aluminium Oxide
Thickness: 0.24mm
Sizes: 76mm / 85mm / 89mm
Suitability: Satisloh, Gerber Coburn
Slurry: Plain water

Country of Origin: United States of America

 

P06090385

Standard Packing: 500pcs/roll - 30rolls/Ctn

Packing Dimension: 42 x 41 x 55cm

Packing Weight: 31.2Kgs

 

P06090113A

Standard Packing: 500pcs/roll - 60rolls/Ctn

Packing Dimension: 42 x 41 x 55cm

Packing Weight: 49Kgs

 

P06090113

Standard Packing: 500pcs/roll - 48rolls/Ctn

Packing Dimension: 42 x 41 x 55cm

Packing Weight: 40.2Kgs